• facebook
  • twitter
  • google+
  • youtube
This is an example of a HTML caption with a link.

Surge Protection Devices

Standards compliance:
UL1449 3rd Edition (USA): Type4, Type2 Location
IEC61643-1 (Intl): Class II
Location of use: Branch sub-distribution boards
Protection modes: (+/-)-PE
Protective element: MOV
Housing: Modular design

Location of use: Branch sub-distribution boards
Protection modes: L/N-PE,L-PE,L-N
Protective element: High Energy MOV
Housing: Modular design
In Accordance with: UL1449 3rd, IEC61643-1, CE, RoHS

Location of use: Branch sub-distribution boards
Protection modes: (+/-)-PE
Protective element: MOV
Housing: Modular design
In Accordance with: UL1449 3rd, IEC61643-1, CE, RoHS

Location of use: Independent Installation
Protection modes: L/N-PE,L-PE,L-N
Protective element: High Energy MOV
Housing: Box design
In Accordance with: UL1449 3rd, IEC61643-1, CE, RoHS

WTH­-SG/RJ45 Series surge protective devices are applied to surge protection for data communication systems.
WTH-SG/RJ45 Series is connected in series in CAT6 network cables, compatible with 100/1000M Ethernet systems, protecting the equipment which are connected to the network (e.g. computers, routers, PoE devices, etc.) against damages by over-voltage surge.
(Standards compliance: IEC61643­21, UL497B, IEEE 802.3af PoE/802.3 at PoE Plus).

Surge Protective Device for Data & Control

1. Power Distribution Unit
2. 19" (482.6mm)
3. Uc~: 320V
4. In: 5kA
5. Imax: 10kA
6. Uoc: 15kV